CoP纳米片制备及其电催化产氢性能的研究

高稳定性的催化剂对于规模化电催化产氢起着关键的作用.因此,采用简单的方法合成CoP纳米片,其表现出优越电催化活性和稳定性. CoP纳米片采用水热法和在氩气中磷化法制备的,纳米片的厚度为100～300 nm.CoP纳米片在0.5 M H2SO4的电解质中,表现出良好的电化学产氢性能,起始过电为～75 mV,塔菲尔斜率为～39. 67 mV/decade,当电流密度为10 mA· cm-2,过电压为～125 mV,经过1000次的循环后,保持良好的稳定性能.     

柠檬果茶中游离态和键合态挥发性成分分析

以柠檬果茶为研究对象,建立了顶空固相微萃取前处理结合气相色谱质谱联用技术测定其中挥发性化合物的分析方法。采用开水冲泡对样品进行提取,通过Amberlite XAD-2大孔吸附树脂对柠檬果茶中的糖苷类挥发性组分键合,分离游离态和键合态化合物,甲醇溶剂作为洗脱剂对键合态化合物进行洗脱,Almondsβ-D-葡萄糖苷酶对其酶解。使用气质联用对样品中游离态和键合态挥发性成分进行检测,其结果根据数据库匹配和对比文献保留时间定性,内标法进行定量。结果表明,柠檬果茶中含有游离态物质24种,键合态物质16种,主要为(+)-柠檬烯、1-辛醇、橙花醇、(-)-4-萜品醇、alpha-松油醇等。方法为花果茶干燥工艺提供参考。     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

半导体纳米复合材料的制备及其光电催化CO2还原

本实验通过模拟植物光合作用,设计制备了新颖的光电联合催化池3D-ZnO/Ni BiVO4/FTO,用电化学沉积法制备了泡沫镍负载的ZnO纳米棒光电阴极和BiVO4光电阳极,以0.1 mol·L^−1 KHCO3水溶液作为电解质,1 mmol·L^−1曙红Y为光敏剂,在−0.6 V硅太阳电池的电压下光电催化还原CO2得到了乙醇、乙酸和甲醇,总产率22.5μmol·L^−1·h^−1·cm^−2。实现了将太阳能贮存为化学能并减少了空气中的CO2,加深了学生对绿色化学和植物Calvin循环机理的理解。     

改性二氧化硅纳米颗粒提高二氧化碳泡沫稳定性的研究

通过纳米二氧化硅的硅烷化改性, 使其在高矿化度盐水中可以稳定存在的前提下, 研究了改性纳米颗粒与阳离子表面活性剂十二烷基三甲基氯化铵混合体系的溶液稳定性及协同稳定CO₂泡沫的效果. 研究结果表明, 无机盐离子对改性纳米颗粒与阳离子表面活性剂间的静电吸引力具有屏蔽作用, 且矿化度越高, 屏蔽效果越明显, 从而混合溶液更易于在高盐水中稳定; 纳米颗粒表面的活性剂吸附层受二者浓度的影响, 进而影响了颗粒的亲/疏水性; 当混合体系中的表面活性剂浓度低于临界胶束浓度(CMC)时, 混合溶液与CO₂的界面张力高于单独活性剂溶液, 而当活性剂浓度高于CMC时, 对CO₂-溶液界面张力几乎无影响, 最低界面张力可降至6 mN/m左右; 改性纳米颗粒的加入可以进一步提高CO₂体相泡沫半衰期一倍以上, 但受二者浓度比例的影响; 纳米颗粒的加入有效提高了多孔介质中泡沫的表观黏度, 最大增幅由20 mPa·s增至55 mPa·s左右, 泡沫黏度增加接近3倍, 增强了CO₂泡沫驱的封堵作用.     

曲贝替定的合成研究进展

作为首个来源于海洋的抗肿瘤药物, 曲贝替定已经被多个国家批准用于进展期软组织肉瘤和复发性卵巢癌的治疗. 由于其结构的独特性和复杂性, 曲贝替定的合成受到了来自学术界和工业界的深度关注. 本文从曲贝替定的结构和逆合成路线方面, 系统评述了曲贝替定的合成研究进展及其环和手性中心的构建策略.     

提纯烟气脱硫渣载氧体煤化学链燃烧性能研究

基于电厂烟气脱硫渣,采用多步酸洗工艺加以提纯并制备获得CaSO_4载氧体。在高温固定床反应器上研究了还原反应温度、载氧体过量系数Φ、多次还原氧化循环等因素对提纯脱硫渣载氧体与煤化学链燃烧特性和气相硫演化规律的影响。结果表明,提纯脱硫渣载氧体有较高的反应活性,能够促进煤的充分转化;综合考虑碳的转化以及气相硫释放的抑制,最优反应工况中还原反应温度确定为900℃、载氧体过量系数Φ=1.0为最佳。经过五次还原氧化循环实验发现,随着循环次数的增加,CaSO_4副反应的进行及气相硫的不断释放,导致提纯脱硫渣载氧体循环反应活性略有降低,反应稳定性受到了一定的影响。     

能量连续传递的超分子人工光捕获系统构筑及其在光催化反应中应用

光捕获系统在自然界光合作用过程中起着至关重要的作用.模拟自然界的光捕获体系,在生物成像、发光器件、光催化以及解决人类面临的能源问题等方面均具有重要意义[1].目前,在水相中构筑高效的人工光捕获系统已取得一系列重要进展[2].然而,为了更好地理解并模拟自然界中以多通道信息通讯为特征的捕光天线系统[3],构筑具有多步连续能量转移特征并能实现光能到化学能转化的人工光捕获体系仍然是一项具有挑战性的工作.     

通过不对称氢转移/动态动力学拆分合成碳环N^3-嘌呤核苷

N^3-嘌呤核苷由于可能同时被嘌呤和嘧啶代谢酶识别,因而有望作为双靶点药物应用于抗病毒治疗.报道了一种以α-(N^3-嘌呤)取代的环烷酮为原料,通过不对称氢转移反应实现动态动力学拆分,高收率高立体选择性地合成系列碳环N^3-嘌呤核苷化合物.该催化体系也适用于α-嘧啶取代的环烷酮底物,且产物通过进一步衍生,合成了2’-F-,Ac S-,N^3-修饰的碳环嘧啶核苷.     

固-液两相流黑水管道冲蚀磨损的数值模拟研究

煤气化黑水处理系统管道由于其流体介质高含固体颗粒和腐蚀性介质，且工作在高温、高压差环境中，极易受到冲蚀磨损和腐蚀的耦合作用而失效，影响其服役寿命. 采用计算流体力学(CFD)方法数值模拟研究了煤气化黑水处理系统固-液两相流管道的冲蚀磨损行为和机理，以及流体介质速度和固体颗粒粒径对管道冲蚀磨损的影响规律，并分析了盲通管和涡室结构对弯管冲蚀磨损行为的优化改善效果. 研究结果显示，煤气化黑水处理系统管线的冲蚀高危区主要分布在弯管外拱和变径管等结构突变区域；管道冲蚀磨损行为与其内部流体的运动和颗粒冲击特性有关；管道的冲蚀率均随着流体速度的增加而加剧，而粒径对弯管和变径管冲蚀率的影响并非单调关系，这与颗粒受力作用有关；弯管优化分析显示，涡室结构可以降低弯管的最大冲蚀率，减缓弯管的冲蚀磨损.